← Back to News
Electrical Times•
Schneider Electric launches TransferPacT Universal Controller to help keep power on when it matters most
Industry NewsWiring RegulationsRegulationsInspection TestingSafetyCareers
Automatic transfer switch equipment rarely makes headlines, yet it underpins the resilience of hospitals, data centres, water treatment works, care homes and commercial premises across the UK. Schneider Electric's launch of the TransferPacT Universal Controller is a reminder that keeping power on in critical environments depends on more than a standby generator. It depends on intelligent switching that can detect a loss of supply, an imbalance between phases or other abnormalities and then transfer the load safely to an alternative source. As controllers become more sophisticated, with real-time monitoring and greater configurability, electricians working in commercial and industrial settings will increasingly be asked to install, commission and maintain this kind of equipment. Doing so competently requires a firm grasp of how primary and alternative supplies interact and what can go wrong when they are not properly separated.
From a regulatory perspective, transfer switching sits squarely within BS 7671. Section 551 covers low voltage generating sets and requires measures to prevent a generator from operating in parallel with the public distribution network unless specific conditions are met. Section 560 sets out the requirements for safety services, where continuity of supply can be a matter of life safety. Getting the earthing arrangements right is particularly important. The switching of neutral conductors and the behaviour of the system when supplied from an alternative source both need careful consideration at design stage. For anyone working towards or refreshing their 18th Edition qualification, these sections are worth studying closely, because they are among the areas where real-world installations most often diverge from good practice.
Equipment of this kind also highlights the importance of thorough inspection and testing. Functional testing of switchgear, interlocks and control circuits is a requirement under BS 7671, not an optional extra, and a transfer system that has never been properly tested under simulated failure conditions offers false reassurance. Testers should also check that the earthing arrangements still perform correctly when the load is running from the alternative source. With battery storage, solar PV and other prosumer installations becoming more common, the principles behind automatic transfer are no longer confined to large critical sites. Electricians who understand alternative supplies, changeover arrangements and the verification of complex systems will find these skills increasingly valuable as the UK's electrical infrastructure becomes more distributed and resilience-focused.
Source
Based on: Schneider Electric launches TransferPacT Universal Controller to help keep power on when it matters most
Published by Electrical Times — Read original article